Limco LC4100 High Solids Clearcoat is a National Rule Compliant acrylic urethane clear for use over Limco Basecoat, Supreme Basecoat and Supreme PLUS Basecoat colors. It is designed to increase the profitability and productivity of the repair facility. LC4100 is an easy to apply two coat clear that has excellent gloss and leveling.
Mixing ratio: 4:1:1
Clear 4 parts LC4100
Hardener 1 part LHF, LHM or LHS
Reducer 1 part LR10, LR11, LR12, LR13 or LR15
Potlife at 68°F/20°C: 4 hours
Spray viscosity Ford #4 @ 68°F/20°C: 14 - 16 seconds
Gravity gun nozzle HVLP: 1.1 - 1.3 mm
Spray pressure HVLP at the cap: 9 - 10 psi
Application: 2 coats
Flash-off time @ 68°F/20°C: 5 - 10 minutes between coats
Film build: 2.0 - 3.0 mils 2.0 - 2.4 mils 2.0 - 3.0 mils
Coverage: 565 sq. ft./gal @ 1.0 mil
68°F/20°C: 30 minutes dust free; 8 hours to handle
140°F/60°C: 30 minutes; must allow 5 minutes flash before force dry
Infra red short wave: 6 - 10 minutes
Wet by Hand: 1200 or Finer
Dry by Hand: 1200 or Finer
Dry by Machine: 1200 or Finer
VOC as packaged: 552 gms/liter (4.6 lbs/gal)
VOC as applied: 535 gms/liter (4.5 lbs/gal)
Comments: Wait 24 hours before sanding, compounding or recoating.
* Mixing with flex agent will alter dry times and viscosity.
This item is only available In Stores